top of page

Ceramic Fibre Blanket for pottery kiln insulation.

We have the following sizes and types available:

 

  • 25mm x 1220mm 1440 degrees Zirconia Ceramic Fibre Blanket
    • This is used as the internal kiln “Face” insulation; this layer of fibre is exposed to the greatest heat of your kiln.
    • Often found as the first layer in the base of our kilns or the first layer of the lids.

 

  • 50mm x 610mm 1260 Degree Standard Ceramic fibre Blanket
    • This is used in packing kilns behind the first layer of the hot face or the bricks.
  • 25mm x 610mm 1260 Degree Standard Ceramic fibre Blanket
    • This is used in packing kilns, behind the first layer of hot face or the bricks, where 50mm may be too thick.

 

  • 13mm x 610mm 1260 Degree Standard Ceramic fibre Blanket
    • This is used in packing kilns, behind the first layer of hot face or the bricks, where 25mm may be too thick
    • Often used to repack bricks in the Cobcraft range of kilns or to pack out enlarged vent or view holes.

 

  • 6mm x 610mm 1260 Degree Standard Ceramic fibre Blanket
    • This is used in packing kilns, behind the first layer of hot face or the bricks, where 13mm may be too thick
    • Often used to repack bricks in the Cobcraft range of kilns or to pack out the enlarged vent or view holes

 

Please select the type of fibre and thickness and the precut size for your kiln or per meter from the drop-down boxes.

.

For Octagon Lid repacks you will need:

  • 1 x layer of hot-face fibre
  • 3 x layers of 50mm fibre
  • 1 x layer of 25mm fibre

 

*We recommend replacing the cup locks and anchor rods for lid fibre replacement.

Ceramic Fibre Blanket - Zirconia (Hot Face) and Standard

PriceFrom $13.99
Excluding Sales Tax
    bottom of page